Product description:
1.General InformationChipset | VIA CBP5.1 | Frequency | CDMA 450MHz Block A | Data Rate | 153.6Kbps | CDMA protocol | IS-95A/B,IS-2000 | Voice coding | 8KEVRC,13KQCELP | Display | 128*64 Dot-Matrix Graphic LCD, with style="padding: 3px 0;" backlight | Memory | 32M ROM, 8M RAM | Sound | 32 Poly | Talk time/Standby time(1200mah) | 3Hours/96Hours | Size | 175(L)x165(W)x38(H) mm |
2.Basic FunctionsItem | Description | Remark |
---|
Calling | Make a call | Auto dial after 6 seconds | Receive a call |
| Caller id display |
| Automatic Redial |
| Delay number send |
| Hand-free call | Auto dial after 6 seconds (can be turn off th style="padding: 3px 0;"is function) | Silent mode |
| Call History | Missed 10, Dialed: 10, Received 10 | Call forwarding | Network support required | SMS | Send message | Inbox: 100 Items | Receive message | Outbox: 100 Items | Phone Book | Phone Book | 200 Entries | Display | Signal indication |
| Battery state indication |
| Volume | Ring volume is adjustable |
| Handset volume is adjustable |
| Alarm |
| Keypad | DTMF Keypad |
|
| Speed dial |
| Network Setting | Lock SID |
| Lock Base ID |
| Language | English |
|
3. RF 3.1 RF receiving Frequency Range | 462~468MHz | RX sensitivity | -104dBm (FER ≤ 0.5%) | Range of receiving signal | -104DBm~-25dBm( FER ≤ 0.5%) | Interference resistance | FER≤1.0% (-101dBm/BW,-30dBm@±900KHz) | Intermediation spurious response attenuation | FER≤1.0% (test1:-101dBm/BW,+900/+1700KHz、-43dBm) | FER≤1.0% (test2:-101dBm/BW,900/-1700KHz、-43dBm) | FER≤1.0% (test3:-90dBm/BW,+900/+1700KHz、-32dBm) | FER≤1.0% (test4:-90dBm/BW,-900/-1700KHz、-32dBm) | FER≤1.0% (test5:-79dBm/BW,+900/+1700KHz、-32dBm) | FER≤1.0% (test6:-79dBm/BW,-900/-1700KHz、-32dBm) | Conducted spurious emission | <-81dBm/1MHz(462~468MHz) | <-61dBm/1MHz(452~458MHz) | <-47dBm/30KHz (oth style="padding: 3px 0;"er frequencies) |
3.1 RF Transmitting: Frequency range | 452~458MHz | Max, power | 23dBm~27dBm@-104dBm | Min output power | <-50dBm@-25dBm | Standby output power | <-61dBm | TX timing error | ±1.0μs | Wave form quality | >0.944 | Open loop power | (test 1:-25dBm/1.23MHz)-57.5~-38.5dBm | (test 2:-65dBm/1.23MHz)-17.5~+1.5dBm | (test 3:-104dBm/1.23MHz)+18~+30dBm | Conducted spurious emission | -42dBc@±885kHz/30kHz | -54dBc@±1980kHz/30kHz |
3.3 Antenna Frequency bandwidth | TX:450MHz~460MHz, RX:460MHz~470MHz, | Voltage standing wave ratio | <2.0:1 | Gain | 4dBi | Input resistance | 50Ω | Polarization form | Vertical polarization |
4. Power Supply4.1 Input Voltage State | Typical voltage |
---|
Power supply by adapter | 6.6V DC | Power supply by battery | 3.6V DC |
4.2 Power consumption Item | Spec | Remark |
---|
Max . Power consumption | 2.5W |
| Typical power consumption | 1.8W | Signal strength style="padding: 3px 0;" is -75dBm | Power consumption in idle mode | 0.005W | Signal strength style="padding: 3px 0;" is -75dBm |
5. Working ConditionItem | Spec |
---|
Working temperature | -20°C ~ + 60°C | Storage temperature | -30°C ~ + 70° | Humidity | 5%-90% |
6. Accessories6.1 Power Adapter Item | Technical Spec. | Type | Switching power supply | Input | Voltage | AC100~240V | Frequency | 50Hz~60Hz | Max. input current | 130mA | Efficiency | ≥ 78% | Output | Voltage | 6.6V DC |
| Max. current | 800 mA |
6.2 Battery Item | Spec |
---|
Type | Li-Ion | Capacity | 1500 mAh | Voltage | 3.6V |
|